Master Airscrew
Hi folks
i wonder if you can help me…
I have a Mavic Air with Master Airscrew props fitted. In the DJI app I have changed the gain setting, following Master Airscrew recommendations ( https://www.masterairscrew.com/pages/mavic-air-gain-settings).
so my question is should I and/or can I make these setting changes in Dronelink?
many thanks
Tim
Comments
3 comments
The link doesn’t work. As far as the DL app goes all the settings in the DJI app stick across apps. So I don’t believe anything else should be needed. All the DJI app settings like RTH, max altitude, max distance, camera settings etc, will all be used by DL. This is the way it works and I don’t know why it would be any different with an older drone like the MA. Hope that helps. Enjoy.
The link has some incorrect characters at the end, if they are removed the link works. Lower motor speed, for use with higher "torque" blades... dunno if that is good or not. I tried these once, found them very brittle and went back to OEM after I cracked a couple of them.
Tim, try running on DJI Fly, then do same using Dronelink... shouldn't be any difference as Mike said.
https://www.masterairscrew.com/pages/mavic-air-gain-settings
(https://www.masterairscrew.com/pages/mavic-air-gain-settings).%C2%A0) is wrong.
Thanks guys
Please sign in to leave a comment.