When an individual Waypoint Altitude is revised, the Approach Altitude also updates to that same value.

Edited October 21, 2022 14:40
3 comments

I notice that when I update an individual waypoint altitude (even one in the middle of a multipoint path), the waypoint approach altitude also updates to that same altitude.

Here's the original plan with the Waypoints Start Altitude set to 100ft:

https://app.dronelink.com/paul-waitzman/beta/plan/24kZradiyLOXMP8PTJsp

Here's the same plan with only the altitude at Waypoint E changed to 30ft. Notice that the Waypoints Start Altitude is also now set to 30ft:

https://app.dronelink.com/paul-waitzman/beta/plan/7QznlzMlZ6YueMVTTWmt

In my case, the result was that the approach altitude was lower than I expected.

Comments

3 comments

Jim McAndrew Dronelink Staff
- October 21, 2022 14:49
Looking into it.

0
Nicolas Roberts Dronelink Staff
- October 21, 2022 18:43
Should be fixed now. Thanks for bringing this bug to our attention.

0
Paul Waitzman
- October 21, 2022 19:24
Yes, I tried it. The Waypoints Start Altitude stays now.

Thanks for the quick response!

0