For RTK enabled drones, it is possible to configure the Network RTK directly in the Dronelink Mobile App on iOS Only. This is not supported on Android.
The Classic Flight Dashboard is required. Learn how to switch to the Classic Dashboard.
With the app open, connected to the RTK drone and mission plan opened, the Flight Dashboard shows the Network RTK button. By default it shows Disabled.
Step 1 - Select Network RTK Button to Begin Setup
Step 2 - Input Network RTK Settings and Select Confirm
Set Configuration settings to Enabled and Auto Connect.
Step 3 - Monitor Connection Status
The Network RTK will display the status as Connected when successful. Open the Network RTK dialog to see the RTK Status.