M300RTK - Unofficial Support and FAQ

The following article summarizes key points surrounding unofficial M300RTK support.

Important Notes:

• Support is unofficial and drone is not actively tested by Dronelink

Below learn about the limited support for the M300RTK, payloads, and how to install the Dronelink app on supported devices.

A Professional Growth plan is required for this drone.

Some features require using the Classic Flight Dashboard. Learn how to switch to the Classic Dashboard.

What devices are supported? 

Unofficial Support:

• M300RTK Smart Controller connected to iOS mobile devices (recommended for most features and best user experience)
  
  • See Connecting M300RTK Smart Controller to Dronelink iOS Mobile App for more details
    • Use the USB port on the Enterprise Smart Controller to run automated missions using a external tablet. (modern iPad Pro for best experience) 

Not Tested / Beta Testing Open:

• DJI RC Plus Remote Controller. Learn how to install.

Not Supported:

• Android mobile devices with M300RTK Smart Controller
• Installing and running Dronelink on the M300RTK Smart Controller (a low performance device)

What M300RTK Payloads are Supported?

Supported:

• H20, H20T, XT2, Z30 with limited command support (see section below)
• Dual Downward Gimbals can be triggered simultaneously and with separate gimbal angles 
• Upward gimbal LIMITED support (currently restricted to 0-30 degrees camera angle, contact us about your use case) 

Not-Supported: P1, L1 and other 3rd party payloads

Camera commands and settings limitations

Support for camera commands and settings depends on whether you are using the Classic or Modern Flight Dashboard. All non-thermal camera settings and commands are supported in the Modern Flight Dashboard. Learn how to switch between the Classic and Modern Dashboard.

Not Supported on Classic Dashboard:

• Spot metering and focus
• Changing camera settings

What thermal features are supported?

Supported:

• Switch between Visual, Thermal, or Side by Side video previews
• Triggering Thermal Camera

Not Supported: 

• Thermal menus, controls and indicators
• Sending thermal camera commands

Configure thermal camera settings in the DJI App before autonomous flight.

Managing Video Feeds for Hybrid Payloads and Dual Gimbals

• Hybrid Payloads - Switching Video Stream Sources - H20, H20T, M2EA
  • M300RTK with the H20 and H20T, or the Mavic 2 Enterprise Advanced support multiple video stream sources, including a split thermal / RGB view for thermal capable payloads
• Multiple Camera Feeds - Multiple Payload and FPV Cameras
  
  • Control multiple video feeds from dual payloads or the FPV camera

Configure Network RTK - with Smart Controller connected to iOS mobile device

Select the Network RTK button on the Flight Dashboard to open the RTK setup dialog

This features requires using the Classic Dashboard.

Learn How to Configure Network RTK

Configure Network RTK - with RC Plus (Beta)

With Dronelink DJI installed on the RC Plus, the RTK setup process does not require using the Classic Dashboard as mentioned above and is supported within the Modern Flight Dashboard.

This is in beta and has not been tested.

Learn how to setup RTK on the RC Plus here. 

Updated Mission Planning Camera Specs for H20 and H20T

New camera specs have been added for the H20 series.

Learn about how to Set Camera Specs During Mission Planning to achieve correct overlaps.