Using multi-lens cameras and understanding errors

  • Updated

Some drones have multiple lenses on a camera payload, such as the Zoom and Wide lens on the Mavic 3 Enterprise. These lenses can only support certain commands and settings, so not every setting or command will work on both lenses. Dronelink does not automatically switch the drone camera lens to the correct one, and no command is available to automate changing the lens. The user needs to select the lens manually in the flight dashboard.


For example, you need to select the zoom lens manually, if you are wanting to run zoom commands. The wide lens will not support this command, and will show an error.



Another example, if you are trying to use Continuous auto-focus on a camera lens that does not support that feature.



Was this article helpful?

0 out of 0 found this helpful